Epson Expression Home XP-200 Small-in-One® All-in-One Printer

Selected FAQ

What should I do if I'm having paper feed problems?
See the solutions for your problem type below.

Paper Feeding Problems

If you have problems feeding paper, try these solutions:

  • If paper does not feed for printing, remove it. Then reload it in the sheet feeder against the right side and beneath the tab. Slide the edge guide against the edge of the paper, making sure that the paper stack is not above the arrow mark on the edge guide.
  • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
  • If paper jams when you load only one or two sheets, try loading more sheets at a time. Do not load more than the recommended number of sheets.
  • If paper jams when you print on both sides of the paper, try loading fewer sheets.
  • For best results, follow these guidelines:
    • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.
    • Load paper in the sheet feeder printable side up.
    • Do not load paper with holes punched in it.
    • Follow any special loading instructions that came with the paper.

Paper Jam Problems

If you have problems with paper jams, try these solutions:

  1. Cancel the print job from your computer, if necessary.
  2. Gently pull out any jammed paper from the output tray and sheet feeder.
  3. Press the B&W copy button or the color copy button to resume printing. If the product lights still show an error, continue with the next step.
  4. Press the power button to turn the product off.
  5. Lift the scanner, remove the jammed paper and any torn pieces.

  6. Lower the scanner and press the power button to turn the product back on.
  7. Carefully follow all paper loading instructions when you load new paper.

Paper Ejection Problems

If you have problems with paper ejecting properly, try these solutions:

  • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint.
  • If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select the correct paper type setting when you reprint.
Related information
Loading Paper
Related tasks
Cancelling Printing Using a Product Button
Related references
Paper or Media Type Settings
Paper Loading Capacity
Published: April 5, 2013

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page