How do I set up my product for the fastest printing?
If printing becomes slow, try these solutions:
- Make sure your system meets the requirements for your operating system. If you are printing a high-resolution image, you may need more than the minimum requirements. If necessary, increase your system's memory.
- If you are using Windows 7, close the Devices and Printers window before you print.
- Clear space on your hard drive or run a defragmentation utility to free up existing space.
- Close any programs you are not using when you print.
- If your product is connected to a USB hub, connect it directly to your computer instead.
- If printing becomes slower after printing continuously for a long time, the product may have automatically slowed down to protect the print mechanism from overheating or becoming damaged. Let the product rest with the power on for 30 minutes, then try printing again.
For the fastest printing, select the following settings in your product software:
Selecting Basic Print Settings - Windows
Selecting Basic Print Settings - OS X
- Make sure the paper type setting matches the type of paper you loaded.
- Turn on any high speed settings in your product software.
- Select a lower print quality setting.
Windows: Click the Maintenance or Utility tab, select Extended Settings or Speed and Progress, and select the following settings:
High Speed Copies
Always Spool RAW Datatype
Page Rendering Mode
Print as Bitmap
Published: December 20, 2012
Thank you for your feedback.
Return to Main FAQs Page