How should I load envelopes?
You can load
envelopes in Cassette 2 (lower cassette) as described here. You can print on
plain paper envelopes in this size:
No. 10 (4.1 x 9.5 inches
[105 x 241 mm]).
Do not remove or insert the paper cassette during printing.
Close the output tray, if necessary.
Note: As you slide in the output tray, there may be slight resistance
and noise. This is normal.
Open the front cover.
Pull on the front cover to pull out the lower paper cassette.
Slide the edge guides outward.
Insert up to 10 envelopes, printable side facedown and flap edge
left, as shown.
Note: Make sure the envelope is not sticking out from the end of the
Slide the edge guides against the envelopes, but not too tightly.
Note: Make sure the envelopes are under the tabs on the edge guides.
Keep the cassette flat as you insert it.
Always follow these
envelope loading guidelines:
- If you have trouble
loading a stack of envelopes, press each envelope flat before loading it or
load one envelope at a time.
- Do not load envelopes that
are curled, folded, or too thin.
Published: December 20, 2012
Return to Main FAQs Page