PowerLite 93+ XGA 3LCD Projector

Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor.

• Press the Color Mode button on the remote control to try different color modes for the image and environment. See Changing the Color Mode.



• Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation. See Image Quality Settings.



• Make sure you selected the correct input source on the Signal menu. See Input Signal Settings



• Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting short cables.



• For computer, check the color balance of your computer's display. (See your computer manual for details.)



• If the colors are incorrect from a video source, make sure you selected the correct Video Signal setting. See Input Signal Settings.



• If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.



• If the image has been progressively darkening, you may need to replace the projector lamp soon. See Replacing the Lamp.

Note: To set the image adjustments back to the default setting, select Menu, select Image, then Reset.