PowerLite 93+ XGA 3LCD Projector

Selected FAQ

The remote control doesn't work. What should I do?
Try the following solutions:

  • Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries.

  • Make sure you are operating the remote control within the reception angle and range of the projector.

  • Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release the button to wake the remote control up.

  • Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projector's remote receivers. Dim the lights or move the projector away from the sun or interfing equipment.

  • If available, turn off one of the remote receivers in the projector's menus system, or check if all the remote receivers were turned off.

  • If you assigned an ID number to the remote control to operate multiple projectors, you may need to check or change the ID setting (feature not availabe with all projectors).

  • If you lose the remote control, you can order another one from Epson.
Published: April 24, 2012

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page