BrightLink 455Wi Interactive Projector

Selected FAQ

Q:
The projected image is blurry or contains dark vertical bands when projecting from a computer. What should I do?
A:
Press the Auto button on the remote control or the Enter button on the projector to reset the projector's Tracking, Sync, and Position settings.

Note:
You must be projecting an image for the Auto button to have any effect. It works only with computer images projected through the Computer port.

If further adjustment is needed, you can fine-tune the Tracking and Sync settings manually using the Signal menu on the projector.

  1. Fill the screen with an image containing fine detail, such as a pattern to appear as your desktop background, or try projecting black text on a white background.


  2. Adjust the Tracking to eliminate vertical bands.

    Tracking Setting


  3. Adjust the Sync setting to increase the image sharpness.

    Sync Setting
Published: February 27, 2012

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page