802.11b Wireless Print Server

Selected FAQ

Q:
What are the minimum Windows system requirements for this product?
A:
For printing with the EpsonNet 802.11b Wireless Print Server, make sure each computer meets the following requirements:

  • Microsoft® Windows compatible PC or laptop with a Pentium® processor or later, 200 MHz or faster recommended
  • Windows 95, Windows 98, Windows Me, Windows NT® 4.0, Windows 2000, or Windows XP
  • 32MB of RAM (64MB recommended)
  • 100MB of free hard disk space (200MB or more recommended)
  • VGA or better display adapter and monitor
  • CD-ROM or DVD drive for installing the utility software

    In addition, each computer needs to be connected to an existing wired network that has a wireless access point, or needs to have a wireless adapter installed.

    An access point may be combined with a hub or router or may be a separate unit.

    Wireless adapters can be installed in a PCMCIA slot on a laptop, a PCI slot in a desktop computer, or connected through a USB port.

    Make sure your wireless adapters(s) work in ad hoc mode if you want to print without an access point.

    To connect the print server to your printer, you also need a high-speed, bi-directional, IEEE-1284 compliant parallel cable (6 to 10 feet long) with a D-SUB, 21-pin, male connector for the print server and a 36-pin Centronics. compatible connector for your printer.

  • Was this helpful? Yes No Didn't Apply

    Viewed FAQs

    Return to Main FAQs Page