PowerLite 1771W WXGA 3LCD Projector

Selected FAQ

What should I do if I see static or noise in the image?
Try the following solutions:

  • Check the cables connecting your computer or video source to the projector. They should be:

    • Separated from the power cord to prevent interference

    • Securely connected at both ends

    • Not connected to an extension cable

  • Check the settings on the projector's Signal menu to make sure they match the video source.

  • Select a computer video resolution that is compatible with the projector.

  • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the Tracking and Sync settings.

  • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.

  • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
Related tasks
Displaying From a PC Laptop
Displaying From a Mac Laptop
Published: May 31, 2012

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page