Epson Perfection 3200 PRO

Selected FAQ

Why won't my system recognize the USB port (Windows 98/2000/ME/XP only)?
The USB interface is not supported by Windows 95 (including OSR-2.x) or Windows NT, you must have Windows ME, Windows 2000, Windows XP or Windows 98 preinstalled full edition. The scanner must be connected to a built-in (root) hub only. If the scanner is attached to a built-in root hub and the scanner isn't recognized, check the computer's user manual to see if the USB port needs to be enabled in the computer's setup. Be sure to use the USB cable that came with your scanner. Turn off both the scanner and your computer. Then turn on your scanner before you turn on the computer. If you're connected to a USB hub, try connecting the cable to the computer's USB port.

Note: Be sure to install the EPSON Scan driver software first before connecting the scanner to your computer. See the Start Here poster for details.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page