PowerLite 1960 XGA 3LCD Projector

Selected FAQ

Why does the image have a blue cast when I connect my video equipment (DVD player, satellite receiver, etc.) to the projector using a component-to-VGA video cable?
Try the following solutions:

  • Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment.

  • Make sure the projector's Input Signal setting is set correctly to match the output signal of your connected video equipment.

  • Make sure the connected video equipment is set up to output video to component video.
Related references
Connecting to a Component-to-VGA Video Source
Input Signal Settings - Signal Menu
Published: June 29, 2012

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page