Epson WorkForce WF-3520 All-in-One Printer

Do the following:

Selecting Print Settings for Printing From a Camera

Before printing from your camera, you can select the print settings you will use for printing your photos.

1. Press the home button, if necessary.
2. Select Setup, then press OK.
3. Select External Device Setup, then press OK. You see this screen:

   

4. Select Print Settings, then press OK.
5. Select the print settings you want to use, then press the  back button.
6. Select Photo Adjustments, then press OK.
7. Select the photo adjustments you want to use, then press the home button to exit.

After you select settings, you are ready to connect your camera and print your photos.

Connecting and Printing From a Camera

Before you connect your camera, make sure the product is turned on but not printing.

1. Remove any memory cards from the product.
2. Load the paper you want to use for printing.
3. Connect the USB cable that came with your camera to the USB port on the front of your product.

   Note: You cannot use the USB port to transfer images from your camera to your computer.

   
4. Turn on your camera. You see this screen:

   

5. Follow the instructions that came with your camera to select and print your photos.

When you finish printing, turn off your camera and disconnect it from the product.

Related information
Loading Paper