I can't print from my Mac with a wireless connection since I received an exchange product from Epson. What should I do?
You'll need to set up your product again. Do the following:
Disable the Firewall
- Select the menu > system preferences, then click either security & privacy or security.
- Select the Firewall tab, then disable the firewall.
If you have other firewall software enabled, you'll also need to disable it. If you don't know how to disable it, contact your firewall provider for help.
Note: This step is needed to install the product's software and complete the Wi-Fi setup. Remember to enable your firewall software after you complete the Wi-Fi setup.
- Go to the next section. (If you are unable to complete this section contact Epson support.)
Install the product software
- Do one of the following:
- If you received an Epson WorkForce WF-3520 for exchange, download the Drivers and Utilities Combo Package from the Drivers & Downloads page for your product.
- If you received a different product (not an Epson WorkForce WF-3520), go to our main Epson support page. Select your product, then Drivers & Downloads. Download the Drivers and Utilities Combo Package for your product.
Note: Make a note of the file name and save location so you can retrieve it.
Important: You'll need to know your network name (SSID) and network password before you can set up your product. If you don't know them, contact the manufacturer of your router or the person who set up your network.
- Open the file you downloaded, and follow the on-screen instructions. When you see the Select Your Connection screen, select Wireless connection, click Continue, then follow the instructions on your computer screen.
- When you see the Select Setup Option screen, select Set up printer for the first time, click Continue, then follow the instructions on your computer screen to complete the installation.
Note: We recommend using a temporary USB cable connection (cable not included) to simplify wireless setup. If you're using Mac OS X 10.6, 10.7, or 10.8, or you don't have a USB cable, you will need to use the control panel on the printer to select wireless settings. Follow the instructions on your computer screen during software installation; they will explain how to connect the printer wirelessly this way.
After you complete the Wi-Fi setup, remember to enable your firewall. If these troubleshooting instructions did not solve the problem, please contact Epson support.
Published: August 2, 2013
Thank you for your feedback.
Return to Main FAQs Page