Epson WorkForce WF-2530 All-in-One Printer

Selected FAQ

Q:
I replaced an ink cartridge and my printer still shows that ink is expended. What should I do?
A:
The inks may not be seated properly, Epson recommends reseating the ink cartridges.

Note: We recommend that you use genuine Epson cartridges and do not refill them. The use of other products may affect your print quality and could result in printer damage.

  1. Turn on your product.
  2. Lift up the scanner unit.
  3. Caution: Do not move the print head by hand; otherwise, you may damage your product. Do not touch the flat white cable inside the printer.

    Caution: Do not lift up the scanner unit when the document cover is open.

  4. Press down each ink cartridge until it clicks into place. (If a cartridge is properly seated already, you may not hear a click.) .

    Note: When you installed the new cartridge, you should have removed the yellow tape from the cartridge. If you know you removed it, go to the next step. If you're not sure, you can pull out the cartridge to check. (Squeeze the tab on the cartridge and lift it straight up.) Remove the tape if necessary, then reinstall the cartridge, pressing it down firmly.

    Caution: Do not remove any other labels or seals, or ink will leak.Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children.

  5. Lower the scanner unit.
  6. Press the OK button. The printer will start charging the inks.
Published: February 1, 2013

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page