Can I connect my product to my wireless network using the buttons
on the control panel?
Yes. You can select or
change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions
on the Start Here sheet and install the necessary software from the
product CD. The installer program guides you through network setup.
Note: Breakdown or repair of this product
may cause loss of fax and network data and settings. Epson is not responsible
for backing up or recovering data and settings during or after the warranty
period. We recommend that you make your own backup or print out your fax and
network data and settings.
- Press the Wi-Fi Setup button. You see this screen:
- Press the
button to select
Wi-Fi Setup Wizard.
- Press the up or down arrow buttons to select the name of your
wireless network and press the
button. If you do not see your wireless network's name, you can enter it
Note: To enter the wireless network name manually, select
Other SSIDs and press the
button. Enter your network name as described in the next step.
- Enter your wireless password (or network name and then password).
you want to print a network status report, or
light should now be on, but not flashing.
- Press the
numeric keypad buttons repeatedly to scroll through characters (uppercase,
lowercase, or numbers).
- To select a
- To move the cursor or enter a space, press the right arrow button.
- To delete
characters, press the left arrow button.
- When you finish entering characters, press the
Note: If the
light is off, you may have selected the wrong network name or entered the
password incorrectly. Repeat these steps to try again.
Published: February 1, 2013
Return to Main FAQs Page