Epson Stylus Photo 900 Ink Jet Printer

Selected FAQ

Q:
How do I install the driver from the EPSON Stylus Photo 900 CD-ROM in Windows Me?
A:
Follow these steps to install the printer driver and software:
  1. Make sure your printer is connected and turned on. Then turn on your computer.


  2. Wait for Windows to detect your printer and display a New Hardware Wizard screen for the EPSON Stylus Photo 900.


  3. DON'T CLICK ANY BUTTONS ON THE SCREEN.

    Note: If the New Hardware Wizard screen doesn't appear, make sure your printer is turned on and connected.

  4. Put the EPSON CD-ROM in your CD-ROM or DVD drive and wait a few seconds for the CD-ROM to be recognized.


  5. Your printer software installs automatically and various messages appear on the screen.

  6. When installation halts, click Finish.


  7. Your computer detects your printer again and you see another New Hardware Wizard screen for the EPSON Stylus Photo 900.


  8. Continue clicking Next or Finish. Installation proceeds automatically.


  9. When installation halts, click Finish.


  10. When you see the license agreement, read it and click Agree. You see the screen shown below. Continue with the steps below to finish installing software.



Follow these steps to finish installing the software:
  1. Click EPSON Printer Information Center on the screen shown below. Follow the instructions on the screen to install it on your desktop.



  2. When you see the Optional Software again, click Photo Software and click the button for each program to learn more about it. Click Install for each program you want and follow the instructions on the screen. Then click Back to return to the Photo Software menu.


  3. Note: If you see a message about installing QuickTime, click Yes and follow the instructions on the screen. You don't need a registration number. At the end of the Film Factory installation, make sure the option to launch the program is not selected.

  4. When you're finished, close any open windows on the screen and click Back.


  5. Click CD Printing Software, then follow the instructions on the screen to install EPSON Print CD.


  6. Close any windows on the screen and click Exit at the Optional Software menu.


  7. When you see the registration screen, register your printer with EPSON as instructed.


  8. Remove the CD-ROM and keep it in case you need to reinstall any software later.


  9. Restart your computer if prompted.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page