PowerLite Home Cinema 5020UBe 3D 1080p 3LCD Projector

Selected FAQ

The image is too light or dark, or colors are incorrect. What should I do?
Try the following solutions:

  • Make sure the Input Signal is set correctly for your connected video equipment. See Other Setup Options.

  • Press the Color Mode button on the remote control to select a different color mode. See Choosing the Color Mode.

  • Make sure your video cables are secure on both ends.

  • Check the brightness and contrast settings. See Input Brightness Settings.

  • Fine-tune the colors. See Color Settings.

  • If the picture looks dark, you may need to replace the lamp. Check the lamp usage timer to see how long the lamp has been in use. Replace the lamp if it's close to the end of its service life.

  • For 3D content, check the 3D Format or the 3D Brightness level setting in the 3D menu. See 3D Setup.
Published: November 30, 2012

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page