PowerLite Home Cinema 5020UB 3D 1080p 3LCD Projector

Selected FAQ

Q:
How do I clean the projector case?
A:
Before you clean the case, turn off the projector and unplug the power cord.

  • To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.


  • To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case and dry it with a dry cloth.

Caution:
Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case. Do not use canned air, or the gases may leave a residue. Never spray any liquid directly on the unit.

Warning:
Before you clean any part of the projector, turn it off, let it cool down, and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in the User's Guide.
Published: November 30, 2012

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page