PowerLite Home Cinema 3020e 3D 1080p 3LCD Projector

Selected FAQ

Q:
What should I do if my projected image appears jittery or shaky when viewing video or moving images?
A:
If you are viewing video from a device connected to the projector's Video port or from a device connected to the projector's Component, HDMI 1, or HDMI 2 port, or a Wireless HD connection, and the signal being sent is interlaced (480i/576i/1080i), be sure to set the Progressive setting to Film/Auto. See Sharpness and Picture Quality Settings.

Note:
Turning on the Progressive setting converts interlaced signals into progressive signals. Select Video for watching videos captured with a video camera. Set to Off when viewing images with a large amount of movement.

For best results, connect your video equipment to the Wireless HD, HDMI 1, or HDMI 2 (High-Definition Multimedia Interface) ports, if possible. If your equipment doesn't support HDMI, connect it to either the Component (for high quality component video) or Video (for composite video).

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page