PowerLite Home Cinema 3020 3D 1080p 3LCD Projector

Selected FAQ

Q:
How do I view 3D Images?
A:
To view 3D content, you must first connect a 3D-compatible video device to one of the HDMI ports on your projector. You will also need a pair of Epson RF 3D Active Shutter glasses or Epson-compatible RF 3D active Shutter glasses.

  • Turn on and begin playback on the 3D-compatible video device.


  • Press the 2D/3D button on the remote control, if necessary.


  • Slide the power switch on your 3D glasses to the On position.




  • Note: If the glasses donít automatically display 3D content, you may need to pair them with the projector. Move the glasses within 10 feet (3 m) of the projector, then press and hold the Pairing button on the 3D glasses for at least 3 seconds. The status light on the glasses will alternately flash green and red, then remain green for 10 seconds if pairing is successful.



    Note: In order to view 3D images correctly, 3D glasses must be worn within 32 feet (10 m) of the projector. Use the image below to determine the viewing distance for 3D projection (the shading represents the 3D viewing area):

Note: The 3D viewing area may differ with non-Epson 3D glasses. Refer to the 3D glasses users guide or contact the manufacturer for the ideal 3D viewing range.

Note: Epson does not guarantee the performance of Epson-compatible RF 3D active shutter glasses. Epson also does not guarantee the compatibility of the Epson RF 3D active shutter glasses with computers or other devices. ces.
Updated: September 24, 2013

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page