DC-20 Document Camera

Selected FAQ

Q:
Part of my image is blurred or out of focus. What should I do?
A:
Try the following:

  • The document camera needs hard edges or sharp lines in the image to be able to focus properly. If the image has only soft edges, try placing a different document under the camera lens while adjusting the focus. Or focus the image manually with the Focus adjustment in the Image menu. See Making Image Adjustments.


  • Make sure the lens is at least 4 inches (10 cm) away from the object you’re viewing.


  • If you’re using a projector to display the image, check its focus.


  • Make sure the document camera lens isn’t dirty. To remove dirt or smears, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface.

    Caution: Be careful not to scratch the lens. Never rub the lens with abrasive materials.


  • Make sure the lens is not fogged by condensation. If you’ve just moved the document camera from a cold environment, wait a couple of minutes before using it.


Published: February 19, 2013

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page