BrightLink 436Wi Interactive WXGA 3LCD Projector

Selected FAQ

Part of my image is blurred or out of focus. What should I do?
If the projected image is fuzzy or blurry, try the following solutions:
  • Adjust the image focus.
  • Clean the projector lens.
  • Check the projector lens cover glass for condensation.

    Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

  • Position the projector close enough to the screen, and directly in front of it.
  • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
  • Adjust the Sharpness setting to improve image quality.
  • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
  • If you are projecting from a computer, use a lower resolution.
Related tasks
Focusing the Image Using the Focus Ring
Cleaning the Lens Cover Glass
Published: February 5, 2013

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page