How do I setup a wireless connection?
You can send images to your projector through a wireless network. To do this, you must install the optional Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection.
Note: To use the interactive pen with your projected computer image, you need to connect the USB cable, even if you are projecting wirelessly through the network. Or, you can use the built-in toolbar to annotate images projected over the network.
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly using the EasyMP Network Projection software.
There are two ways to connect the projector to your wireless network:
After installing the module and setting up the projector, install the network software from the Epson Projector Software CD on your computer. Use the following software and documentation to set up, control, and monitor wireless projection:
Follow the instructions in these sections to set up your projector for wireless projection:Installing the Wireless LAN Module
Using Quick Wireless Connection (Windows Only)
Selecting Wireless Network Settings Manually
Selecting Wireless Network Settings in Windows
Selecting Wireless Network Settings in Mac OS X
Setting Up Wireless Network Security
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Setting Up Crestron RoomView Support
Controlling a Networked Projector Using Crestron RoomView
Wireless LAN Menu Settings
Wireless Security Menu Settings
Network Projector E-mail Alert Messages
Optional Equipment and Replacement Parts
Projector Network Settings - Network Menu
Solutions When Network Alert E-Mails are Not Received
Projector Setup Settings - Extended Menu
Crestron RoomView Support