Epson PowerLite 8300i

Selected FAQ

Q:
Why can't I project an Image?
A:
If you see a blank screen or a blue screen with the No Signal message, try the following:

  • Make sure the cables are connected correctly. See Chapter 1 of the User's Guide for more instructions.


  • Make sure the power light is green and not flashing and the lens cover is off.


  • If you've connected more than one computer and/or video source, you may need to press one of the Source buttons on the projector's control panel or the remote control to select the correct source. (Allow a few seconds for the projector to sync up after pressing the button.)


  • If you're using a PC laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page