PowerLite 7800p Multimedia Projector

Selected FAQ

Q:
How should I clean the air filter and vents?
A:
Clean the air filters and air intake vents after every 100 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector.

Follow these steps to clean the air filter:

1. Turn off the projector and unplug the power cord.

2. To clean the intake vents, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment. If you don't have one, gently clean the vents with a soft brush (such as an artist's paintbrush).







3. Gently turn the projector over and remove the filters from the side and bottom of the projector. Then use a small vacuum cleaner or soft brush to clean the filters. Slide the filters back into place when you're done.









4. If the dirt is difficult to remove or a filter is broken, replace the filters. Contact your dealer or call EPSON at (800) 873-7766 in the United States to obtain new ones. In Canada, please call (800) 463-7766 for dealer referral.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page