PowerLite 7800p Multimedia Projector

Selected FAQ

Q:
When I connect my PC to the projector’s 15 pin VGA “Computer” port, the screen is displayed, but all 4 sides are clipped. How can I fix this?
A:
The projector’s 15 pin VGA “Computer” connector has two video input signal modes; Analog-RGB and RGB-Video. When using this connector with your computer, make sure that you have selected Analog-RGB as the signal mode. If RGB-Video is selected, the displayed image will be clipped on all four sides.

To change the setting, follow these steps:
  1. Press the Menu button on the control panel or remote control, to bring up the projector’s menu.


  2. Use the arrow buttons to navigate to the Settings menu, then press Enter.


  3. Select Computer Input and press Enter.


  4. Select Analog-RGB and press Enter.
Your computer image will now appear without any clipping.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page