PowerLite W16 3D WXGA 3LCD Projector

Selected FAQ

How long should the projection lamp last in normal operation?
Lamp Life:
  • Normal Power Consumption mode: Up to about 4000 hours
  • ECO Power Consumption mode: Up to about 5000 hours

Note: Lamp life vary depending on mode selected, environmental conditions, and usage. Brightness decreases over time.

To prolong the life of the lamp, you can do the following:

  • Turn on the projector's Sleep Mode setting.
  • Turn off the projector when not in use.
  • Make sure the projector is operated within the environmental requirement of 41 to 95 ºF (5 to 35 ºC) when operating and 14 to 140 ºF (–10 to 60 ºC) when stored.
  • Lower the projector's Brightness setting.
  • Clean the air filter if dust collects on the filter or exhaust vent.
  • When you replace the lamp, make sure you don't touch the lamp with your bare hands. The invisible residue left by the oils on your hands may shorten the lamp life. Use a cloth or a glove to handle the lamp.
  • Press the A/V Mute button on the remote control or close the A/V Mute slide when you don't need to display the image.
Related references
Projector Setup Settings - Extended Menu
Image Quality Settings - Image Menu
Published: May 15, 2013

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page