PowerLite W16SK 3D 3LCD Dual Projection System

Selected FAQ

Q:
How do I adjust the projector settings for rear and/or ceiling placement?
A:
You can change the projection mode using the remote control or by changing a menu setting.

Follow these steps:

  • Turn on the projector and display an image.
  • Press the Menu button.
  • Select the Extended menu and press Enter.
  • Select the Projection setting and press Enter.
  • Select a projection mode and press Enter.
  • Press Menu or Esc to exit the menus.

You can also change the projection settings from Front to Front/Ceiling or Rear to Rear/Ceiling by pressing and holding the A/V Mute button on the remote control for 8 to 10 seconds or until an image appears.

Note: To project from overhead, you'll need the optional ceiling mount hardware. You can purchase the ceiling mount (part number ELPMBPJF) from your dealer or from the Epson Store.

Note: To view 3D images, you must project onto the front of a silver screen designed for passive 3D images.

Related tasks
Changing the Projection Mode Using the Remote Control
Changing the Projection Mode Using the Menus
Published: May 15, 2013

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page