BrightLink Pro 1410Wi Meeting Room Productivity Tool with Wall Mount

Selected FAQ

Q:
Can I connect the projector to a network?
A:
You can send images to your projector through a wired network. To do this, you connect the projector to your network, and then set up your projector and computer for network projection.

After connecting and setting up the projector as described here, install the network software from the Epson Projector Software CD-ROM on your computer. Use the following software and documentation to set up, control, and monitor network projection:

  • EasyMP Network Projection software sets up your computer for network projection. See the EasyMP Network Projection Operation Guide for instructions.
  • EasyMP Monitor software (Windows only) lets you monitor and control your projector through the network. You can download the latest software and documentation from the Epson web site. Go to www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and select your projector.
  • Connect to a Network Projector (Windows 7 and Windows Vista only)

Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly using the EasyMP Network Projection software.

Follow the instructions in these sections to set up your projector for wired projection:

Connecting to a Wired Network
Selecting Wired Network Settings
Published: May 20, 2013

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page