PowerLite 935W WXGA 3LCD Projector

Selected FAQ

I replaced the projection lamp, but I still see the message "Replace the Lamp". How do I clear this message?
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.

  1. Turn on the projector.
  2. Press the Menu button.
  3. Select the Reset menu and press Enter.

  4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours.
  5. Select Yes and press Enter.
  6. Press Menu or Esc to exit the menus.
Published: March 11, 2013

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page