What should I do if only part of the picture is displayed or the image looks distorted?
If only a partial computer image appears, try the following solutions:
Input Signal Settings - Signal Menu
Supported Video Display Formats
- Press the Auto button on the remote control to optimize the image signal.
- Make sure you selected the correct Screen Type setting for the screen being used.
- Make sure the Scale setting in the Extended menu is turned off.
- Try adjusting the image position using the Screen Position menu setting.
- Press the Aspect button on the remote control to select a different image aspect ratio.
- If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button twice to return to a full display.
- Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
- Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)
Published: July 16, 2013
Thank you for your feedback.
Return to Main FAQs Page