PowerLite Home Cinema 5030UB 2D/3D 1080p 3LCD Projector

Selected FAQ

What should I do if I see the message "No Signal"?
If the "No Signal" message appears, try the following solutions:
  • Press the Source button on the projector repeatedly to cycle through the available sources. Wait a few seconds for an image to appear.

  • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.

  • Check the connection from the projector to your video sources.

  • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.

  • If necessary, turn the projector and the connected computer or video source off and then on again.

  • If the other solutions do not solve the problem, reset all of the settings using the Reset menu.
Published: October 17, 2013

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page