PowerLite Home Cinema 5030UB 2D/3D 1080p 3LCD Projector

Selected FAQ

Q:
How do I charge the Epson RF 3D Active Shutter Glasses?
A:
Charge the glasses when the status light on the glasses flashes red to indicate a low battery.
  1. Connect the smaller end of the charging cable to the port on the bridge of the glasses.

    Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.

  2. Do one of the following:
    • Plug the other end of the charging cable into a powered USB port on a computer or other device.
    • Plug the other end of the charging cable into a USB-to-AC adapter with the following specifications:

      Input: 100-240V, ~0.15A, 50-60Hz

      Output: 5V=1A

The glasses are fully charged when the status light on the glasses stays green.
Published: January 30, 2014

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page