Epson WorkForce Pro WF-4630 All-in-One Printer

Selected FAQ

Q:
How do I set up my product for the fastest printing?
A:
Try the following:

Printing is Slow

If printing becomes slow, try these solutions:

  • Make sure your system meets the requirements for your operating system. If you are printing a high-resolution image, you may need more than the minimum requirements. If necessary, increase your system's memory.
  • If you are using Windows 7, close the Devices and Printers window before you print.
  • Clear space on your hard drive or run a defragmentation utility to free up existing space.
  • Close any programs you are not using when you print.
  • If your product is connected to a USB hub, connect it directly to your computer instead.
  • If printing becomes slower after printing continuously for a long time, the product may have automatically slowed down to protect the print mechanism from overheating or becoming damaged. Let the product rest with the power on for 30 minutes, then try printing again.

For the fastest printing, select the following settings in your product software:

  • Make sure the paper type setting matches the type of paper you loaded.
  • Turn on any high speed settings in your product software.
  • Select a lower print quality setting.
  • Make sure the ink drying time has not been increased for double-sided printing.
  • Windows: Click the Maintenance tab, select Extended Settings, and select the following settings:

    • High Speed Copies
    • Always Spool RAW Datatype
    • Page Rendering Mode
    • Print as Bitmap

Published: May 15, 2014

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page