Epson WorkForce Pro WF-4630 All-in-One Printer

Selected FAQ

Q:
How do I manually assign a static IP address to my printer?
A:
Do the following:

Windows

  1. Download and install the EpsonNet Config Utility from the Drivers & Downloads page for your printer.
  2. Select Start > Programs > EpsonNet > EpsonNet Config.
  3. Highlight your printer's name, then click Configuration.
  4. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.



  5. Click Send.
  6. Close EpsonNet Config.

OS X

  1. Download and install the EpsonNet Config Utility from the Drivers & Downloads page for your printer.
  2. Open the Hard Drive. Select Applications > EpsonNet > EpsonNet Config v3 > EpsonNet.
  3. Highlight your printer, then click Configuration.
  4. Select Basic (under TCP/IP) in the Device Properties window.
  5. Select Manual. Enter the IP Address, Subnet Mask, and Default Gateway in the IP Address Setting section.



  6. Click Transmit.
  7. Close EpsonNet Config.
Published: May 15, 2014

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page