PowerLite 1262W Wireless WXGA 3LCD Projector

Selected FAQ

Q:
The image is too light or dark, or colors are incorrect. What should I do?
A:
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
  • Press the Color Mode button on the remote control to try different color modes for the image and environment.
  • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation.
  • Make sure you selected the correct Input Signal or Video Signal setting on the Signal menu, if available for your image source.
  • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.
  • If you are using the ECO Power Consumption setting, try selecting Normal in the projector's menus.

    Note: At high altitudes or locations subject to high temperatures, the image may become darker and you may not be able to adjust the Power Consumption setting.

  • Position the projector close enough to the screen.
  • If the image has been progressively darkening, you may need to replace the projector lamp soon.
Related concepts
Projector Maintenance
Related references
Projection Distance
Available Color Modes
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Setup Settings - ECO Menu
Published: September 6, 2013

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page