PowerLite Home Cinema 2030 2D/3D 1080p 3LCD Projector

Selected FAQ

What should I do if I see static or noise in the image?
If the projected image seems to contain electronic interference (noise) or static, try the following solutions:
  • Check the cables connecting your computer or video source to the projector. They should be:
    • Separated from the power cord to prevent interference
    • Securely connected at both ends
    • Not connected to an extension cable
    • No longer than 10 ft
  • Check the settings on the projector's Signal menu to make sure they match the video source.
  • Select a computer video resolution and refresh rate that are compatible with the projector.
  • If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.
  • If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
Published: September 6, 2013

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page