PowerLite Home Cinema 2030 2D/3D 1080p 3LCD Projector

Selected FAQ

Q:
Can the projector do rear projection?
A:
Yes. You can change the projection mode using the remote control or by changing a menu setting.

Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.

  • Front (default setting) lets you project from a table in front of the screen.
  • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
  • Rear flips the image horizontally to project from behind a translucent screen.
  • Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind a translucent screen.

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
  1. Turn on the projector and display an image.
  2. Press the Menu button.
  3. Select the Settings menu and press Enter.

  4. Select the Projection setting and press Enter.
  5. Select a projection mode and press Enter.
  6. Press Menu or Esc to exit the menus.
Published: September 6, 2013

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page