Livingstation LS57P1

Selected FAQ

When I connect my video equipment (DVD player, satellite receiver, etc.) to the Livingstation using a component video cable, the image/picture has a blue cast or haze. What could be causing this?
The problem could be caused by a connection problem or the configuration of your video equipment. Check the following:
  • Make sure your component video cable is connected properly. The connectors on the cable are color-coordinated, so the red, green, and blue connectors should be attached to the the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the Livingstation.

  • Make sure your video equipment is set up properly. (See the manual for your equipment for instructions.) For example, make sure the output signal is set to YPbPR and not YC or YCbCR.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page