PowerLite 821p Multimedia Projector

Selected FAQ

The message “Not Supported” is displayed. What’s wrong?
Make sure your computer’s resolution and frequency are supported by the projector. If necessary, change your computer’s resolution setting.

If you’re projecting from a composite or S-video source, make sure the correct Video Signal is selected in the Signal menu. It should be set to Auto unless you are projecting from a 60 Hz PAL video source, in which case it should be set to PAL60.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page