Epson L-500V

Selected FAQ

What should I do if the image on the screen is too dark or too bright?
Check the following:

  • Make sure the flash is not set to “flash off”. However, if you are shooting a close-up in macro mode, you should try using the “flash off” setting. See Controlling the Flash.

  • If you are using the flash, make sure you are within the flash range.

  • If you are using manual mode, you can adjust the exposure compensation or light sensitivity settings.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page