PowerLite 62c Multimedia Projector

Selected FAQ

Q:
Why don’t the colors in the projected image look right?
A:
Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor.
  • Try selecting a different Color Mode. See Adjusting the Color Mode for information about the Color Mode button. You can also change the color mode in the Image menu to adjust the color.


  • If you’re displaying video, adjust the Color Saturation and Tint settings on the Image menu.

  • Adjust the Brightness, Contrast, and Color Adjustment settings on the Image menu.

  • Make sure the input signal setting on the Signal menu matches the signal from the connected device. If the image is too purple and you’ve connected a computer, RGB video device, or component video device to the Computer1(Component) or Computer2(Component) port, select Computer1 or Computer2 as the input source. If you’re projecting from a composite video or S-Video source, make sure the correct Video Signal is selected on the Signal message.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page