PowerLite S4 Multimedia Projector

It doesn't usually matter which order you turn on your equipment, but you can follow this sequence to make sure your source is displayed:

1. If you are connecting a device other than a computer, turn it on first. If you are connecting a computer, don’t turn it on yet.
2. Press the  Power button on the projector or remote control. You hear a beep, the  power light flashes green, and the projector lamp comes on in about 6 seconds.
3. If you are using a computer, turn it on now.

When you’re finished using the projector, follow this sequence:

1. Turn off the power to the computer/video equipment.
2. Press the  Power button on the projector or remote control.
3. When you see the confirmation message, press the  Power button again. The  power light flashes orange as the projector cools down.
4. When the  power light is a steady orange, unplug the projector.

	Caution:
	Never unplug the projector when the  power light is green or flashing orange.