Epson Stylus C88+ Inkjet Printer

Selected FAQ

How do I test the printer without using a computer?
You can run a nozzle check to help determine if the Stylus is operating properly. Follow these steps:
  1. Turn off the Stylus.

  2. If your computer is connected, disconnect the USB cable.

  3. Load plain paper in the sheet feeder.

  4. Hold down the   paper button, then press and release the   power button. Continue holding down the   paper button until the green   power light begins to flash, then release it.

  5. A test page prints showing the printer’s ROM version number, an ink counter code, and a nozzle check pattern.

  6. If the page is printed, your Stylus is operating properly. The problem may be caused by your computer, cable, software, or setting selections.

    If the pattern on the page has gaps, clean or align the print head.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page