Epson Stylus Photo R380 Ink Jet Printer

Selected FAQ

Q:
Since I upgraded to Macintosh OS X 10.5 (Leopard), my printouts are faint. What should I do?
A:
Make sure you’re not using the Macintosh OS X 10.5 Gutenprint driver. Follow these steps to check if you’re using the Gutenprint driver and change it if necessary:
  1. From the Apple menu, select System Preferences.


  2. Click Print & Fax.


  3. If necessary, click once on your printer’s name in the Printer list. (You don’t need to do this if only one printer driver is installed).


  4. If you see Gutenprint next to your printer name, go to step 5 to change the driver. (The Epson Stylus Photo RX620 appears in the example below, but you’ll see your printer or all-in-one name instead).


  5. If you see only your printer’s name, you’re using the correct driver, and you can skip the remaining steps.



  6. Turn off the printer.


  7. Click the button to remove the printer from the Printers list, then click OK.


  8. Turn on the printer. Your computer should add the printer automatically.


  9. If your computer does not add the printer or if it adds the Gutenprint driver again, contact Apple for assistance. You may need to reinstall the Epson drivers provided with Macintosh OS X 10.5.

    Note: To check ink levels, click the Utility button, then click EPSON StatusMonitor. The Supply Levels button will not show remaining ink levels for your Epson printer.
Published: November 19, 2007

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page