Epson Stylus Photo R380 Ink Jet Printer

Selected FAQ

Q:
How can I stop the printer from feeding multiple pages at the same time?
A:
If the printer feeds multiple pages, follow these steps:

  1. Remove them from the sheet feeder.


  2. Fan the edges of the sheets.


  3. Reload them against the right side of the sheet feeder.


  4. Slide the left edge guide snugly, but not too tightly, against the paper. Don’t load paper above the arrow on the left edge guide and make sure it is under the tabs on the left and right edge guides.
If that doesn’t help, make sure the paper you’re using is not too thin or too thick. If it is very humid, the paper may have absorbed moisture and should be replaced with dry paper. If necessary, try different paper from a new package. Check the paper specifications for information about supported paper sizes and thicknesses.
Published: September 28, 2006

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page