PowerLite Home Cinema 400 Projector

Selected FAQ

Q:
Part of my image is blurred or out of focus. What should I do?
A:
Check the following:

  • Make sure the Input Signal is set correctly for your video equipment See Input A in Other Setup Options.


  • There may be dirt on the lens. To remove dirt or smears, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens surface.


  • Adjust the focus using the focus ring.



  • Make sure the lens is not fogged by condensation. If you’ve just moved the projector from a cold environment, wait a couple of minutes before using it.


  • Adjust the Sharpness setting.


  • If you’re projecting from a computer, you may need to adjust the Tracking and Sync settings.
Published: October 6, 2006

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page