Epson PowerLite Pro Cinema 800 HQV

Selected FAQ

The image is not rectangular. How can I fix this?
If the image looks like or , the projector has been placed off to one side of the screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift dial to center the image. See Positioning the Image.

If the image looks like or , use the remote control to access the Keystone function to correct its shape. See Correcting the Image Shape. Or press the and buttons on the projector’s control panel.

Note: You won’t have to use the Keystone function to correct the image, as long as you place the projector level (not angled up or down) and at a height between the top and bottom of the screen. Then use the vertical lens shift knob to position the image. This produces the best-looking picture.

Note: You cannot perform keystone correction when the aspect ratio is set to Wide.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page