Epson PowerLite Pro Cinema 800 HQV

Selected FAQ

Why does the image have a blue cast or haze when I connect my video equipment (DVD player, satellite receiver, etc.) to the projector using a component video cable?
The problem could be caused by a poor connection or the configuration of your video equipment. Check the following:

Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the corresponding connectors on your equipment and the projector.

Make sure the projector’s Input Signal setting is set correctly to match the output signal of your connected video equipment.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page