PowerLite Pro Cinema 1080 Projector

Selected FAQ

Q:
Why does the image/picture have a blue cast or haze when I connect my video equipment (DVD player, satellite receiver, etc.) to the projector using a component video cable?
A:
The problem could be caused by the connection or configuration of your video equipment. Check the following:

  • Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.


  • Make sure the projector’s Input Signal setting is set correctly to match the output signal of your connected video equipment.
Published: February 16, 2007

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page