PowerLite 1810p Multimedia Projector

Selected FAQ

Q:
My image does not appear on the screen. What should I do?
A:
If no picture appears, try the following:

  • Check that the Power light is green, not flashing.


  • The projector may be in standby or sleep mode. If the Power light is orange, press the  Power button to turn the projector on.


  • If the power was switched off and then on again, the projector may be cooling down. Wait until the Power light stops flashing and remains orange; then press the  Power button again.


  • Press the A/V Mute button on the remote control to make sure the picture has not been turned off temporarily.


  • Open the A/V mute slide (lens cover), if it is closed.


  • The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.


  • If you are projecting from a DVD player or other video source, make sure you turn it on and press its Play button.
Published: March 5, 2007

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page